About this guide: I'm Lawrence, the writer behind supa.is. Between February and May 2026 I've published 150+ articles on supa.is across crypto and brokerage tooling — including 40+ Hyperliquid-specific guides (recent examples: Hyperliquid Mobile QR Code Connection Guide, Hyperliquid App Interface Guide: Panels Explained, Hyperliquid Mobile QR Code Login Not Working? Fix). The most-repeated reader question across that Hyperliquid archive is exactly how to get price notifications on the mobile app, which is why I'm publishing this standardized guide instead of answering one-off.
If you run Hyperliquid perpetuals, you already know the failure mode: you step away from the desk, a funding flip or a liquidation cascade moves the price 3% in ten minutes, and by the time you notice, the PnL you were protecting is gone. The obvious fix is to make the phone tell you when price crosses a level. That is exactly what "Hyperliquid mobile app alerts price notifications setup" searches are looking for.
Here is the honest answer before anything else: the Hyperliquid mobile app is a thin client over the same web interface, and the official documentation's mobile onboarding page (connect mobile via QR code) covers getting the app signed in. It does not document a separate in-app price alert engine with its own notification settings. There is no "Alerts" tab in the mobile app that you configure the way you would on a centralized exchange. The app can notify you about account events (fills, liquidations, withdrawals) through the standard mobile notification permissions, but for *price-level* alerts, the practical route is the chart layer: set alerts on the chart interface, then verify on your account that the alert fires on your phone before relying on it.
This guide explains what the mobile app can and cannot notify, why the chart-alert route is the one to test first for perpetual traders, and how to keep the notification pipeline from silently dying.
What the Hyperliquid mobile app actually is
The mobile app is not a separate product with its own feature set. Hyperliquid's official onboarding docs describe connecting the mobile app by scanning a QR code from the web interface (Hyperliquid docs: connect mobile via QR code). The app then renders the same interface you use in a browser: order book, positions, portfolio, and the chart.
That design choice has a direct consequence for alerts. Everything the app shows, the web interface shows. If a feature is not in the web interface, it is not in the app. And the alerting surface in the web interface is the chart, not a standalone alerts panel.
This also explains why so many "setup" searches end in frustration: people expect an "Alerts" menu in the app, find none, and conclude the app is broken. It is not broken. It is just a client. The alerting happens one layer up, at the chart.
If you are still getting the app signed in in the first place, the QR flow is the documented path, and the dedicated fix for QR login problems is covered in Hyperliquid Mobile QR Code Login Not Working? Fix.
What the mobile app can notify you about
The app can deliver push notifications for account-level events. These are the events that matter for risk, and they arrive without any chart involvement:
- Fills — when an order executes, including limit orders that get hit while you are away.
- Liquidations — when a position is liquidated. This is the notification you most want and most fear.
- Withdrawals — when funds leave the account. Useful as a basic security signal.
The practical checklist for account-event notifications:
- Grant the Hyperliquid app full notification permission in your phone settings.
- Disable battery optimization / adaptive battery for the app, so the OS does not throttle its background activity.
- Keep the app installed and signed in; an uninstalled or logged-out app cannot receive pushes.
- Test with a small order you expect to fill, rather than waiting for a real liquidation to find out the pipeline is dead.
What the mobile app cannot do: standalone price alerts
This is the part the search results get wrong. There is no in-app "create price alert" button in the Hyperliquid mobile app that lets you set "notify me when BTC hits X" as a standalone feature with its own list and management screen. The app does not expose a separate alerting engine.
So when you want a *price-level* notification — "tell me when the mark price crosses 64,000" — the working route to test first is the chart. The chart interface supports alert objects, and the practical workflow is to create the alert on the chart, then verify on your account that the alert fires on your phone before relying on it. The alert lives on the chart, not in the app. The app is the delivery endpoint you must confirm.
This distinction matters because it changes where you go to manage alerts. You do not manage price alerts in the app's settings. You manage them on the chart, and the app receives them only if your account and phone state allow it. If you are looking for an "Alerts" tab in the app and not finding one, stop looking — it is not there, by design.
The reliable route: chart alerts, verified on your phone
The setup to test first for perpetual traders is this:
Like what you're reading? Try it yourself — this link supports ChartedTrader at no cost to you.
Create your Hyperliquid account →- Open the chart in the Hyperliquid interface (web or app — the chart is the same component).
- Add an alert object at the price level you care about. For perpetuals, choose the price series that matches your risk: the mark price is what liquidations reference, so a mark-price alert is the one that lines up with your liquidation math.
- Confirm the alert is active and that the mobile app is signed in with notification permission granted.
- Verify on your account that the alert fires on your phone before relying on it.
A contrarian note on alert placement: most people set one alert at their liquidation price. That is the wrong single alert. By the time price reaches your liquidation level, you have no room to reduce without slippage. The more useful alert is the one at the level where your margin cushion drops to a threshold you have pre-decided, say half your initial cushion. That gives you a decision window instead of a panic window.
Why notifications silently stop working
The chart-alert route is the right one to test, but the delivery pipeline is not guaranteed by the chart alone. Three failure modes account for nearly all "my alert never fired" reports:
- OS battery management. Android in particular will throttle background apps. A crypto app that has not been opened in a day is a prime candidate for doze mode, and pushes queued during doze can be dropped or delayed. The fix is to whitelist the app from battery optimization.
- App logged out or reinstalled. A wallet re-seed, an app update that clears state, or a phone restore can leave the app signed out. An unsigned-in app receives no pushes, and there is no in-app warning that the pipeline is down.
- Alert not actually active. An alert object that was created on a chart you later closed, or that was tied to a symbol view that changed, may not be the alert you think it is. Verify the alert exists and is armed before you rely on it.
Mobile onboarding: the QR connection that makes all of this work
None of the above works if the mobile app is not properly connected to your account. The documented path is the QR-code connection: generate the QR from the web interface and scan it with the mobile app to link them (Hyperliquid docs: connect mobile via QR code). The step-by-step walkthrough, including the camera-permission and network conditions that cause scans to fail, is in Hyperliquid Mobile QR Code Connection Guide.
If the scan itself is the problem — the app opens the camera but the code will not link — that is a distinct failure from a dead notification pipeline, and it is covered in Hyperliquid Mobile QR Code Login Not Working? Fix. Do not conflate the two: a QR login failure means the app is not signed in at all, while a notification failure means the app is signed in but the OS or app state is blocking pushes.
A note on interface familiarity
If the app layout is still new to you, the panels and what each one does are broken down in Hyperliquid App Interface Guide: Panels Explained. Knowing where the chart lives and where the positions panel lives is a prerequisite for placing and verifying alerts without fumbling.
Setting up the account in the first place
If you do not have a Hyperliquid account yet, the referral link below gives you a 4% fee discount on the first $25M of volume per account, as of 2026-08. That discount applies to the first $25M of volume and excludes Vaults and sub-accounts, as of 2026-08. For a mobile-first trader, the fee discount compounds over time, because you will be placing and adjusting orders from the app more often than you think.
Create your Hyperliquid account and you get the 4% fee discount on the first $25M of volume per account (Vaults and sub-accounts excluded), as of 2026-08.FAQ
Does the Hyperliquid mobile app have its own price alert feature?
No. The app is a client over the web interface and does not expose a standalone in-app price alert engine. Price-level alerts are set on the chart, and you should verify on your account that the alert fires on your phone before relying on it.
What notifications does the mobile app send automatically?
It can send push notifications for account events such as fills, liquidations, and withdrawals, provided the app is signed in and your phone has granted it notification permission.
Why did my price alert never fire?
Most often the app was signed out, the OS battery management throttled background pushes, or the alert was not actually armed on the chart. Verify the alert exists and test the pipeline with a tight alert on a liquid symbol.
How do I connect the mobile app to my account?
Use the documented QR-code connection: generate the QR from the web interface and scan it with the mobile app, as described in the official onboarding docs.
Does the referral fee discount apply to mobile trading?
Yes. As of 2026-08, the 4% fee discount applies to the first $25M of volume per account and is not limited by device; Vaults and sub-accounts are excluded.
Risk Warning
Risk Warning: Crypto trading involves substantial risk of loss. Never invest more than you can afford to lose. This is not financial advice.
Affiliate Disclosure
This article contains affiliate links to Hyperliquid. If you create an account through the link, we may earn a commission at no extra cost to you. The 4% fee discount mentioned applies to the first $25M of volume per account and excludes Vaults and sub-accounts, as of 2026-08.
Continue with Hyperliquid
Browse the Hyperliquid guide hub for the complete user journey.